Hooker Headers Neon Sign – Official Brand Merchandise
Our official Hooker Headers neon sign brings iconic performance branding to any garage, workshop, or collector space. This LED neon design replicates the classic Hooker script and header-flame logo in bright, energy-efficient tubing mounted on a durable black acrylic backing. The sign ships ready to hang with pre-drilled mounting holes and includes a 6-foot power cord with inline switch.
Whether you’re outfitting a home garage, retail showroom, or man cave, this sign delivers instant vintage motorsport atmosphere without the fragility or power draw of traditional glass neon. We built it to last – UV-resistant tubing stays vibrant under shop lighting, and the low-voltage LED design runs cool to the touch even after hours of operation.
Neon specs & installation
LED neon construction & power specifications
This hooker headers sign uses modern LED flex neon technology – silicone-jacketed LED strips that mimic the look of traditional glass neon without the high voltage or breakage risk. The tubing bends smoothly to form the Hooker script and flame graphics, then mounts to a laser-cut black acrylic panel that provides structural support and clean visual contrast.
Power delivery is straightforward: plug the included 6-foot cord into any standard 110V outlet, flip the inline switch, and the sign illuminates instantly with no warm-up period. Total power draw sits around 12 watts – roughly equivalent to a single LED bulb – so you can leave it on during shop hours without spiking your electric bill. The transformer steps household voltage down to safe low-voltage DC before it reaches the LED strips, and all components are UL-recognized for indoor use.
Mounting & installation in your space
We pre-drill two keyhole mounting slots on the back panel, spaced 20 inches apart horizontally. Hang the sign on two screws or wall anchors rated for at least 5 pounds each – the entire assembly weighs just under 3 pounds, so standard drywall anchors or wood screws into studs both work fine.
Position the sign where the power cord can reach an outlet without excessive slack or tension. The 6-foot cord length covers most garage tool-board or showroom wall placements, but if you need more reach, any standard indoor-rated extension cord works. Mount the sign at eye level or slightly above for best visibility – we recommend centering it over a workbench, tool chest, or display shelf so the glow draws attention to your performance parts collection.
Care & long-term maintenance
LED neon requires almost no maintenance. Wipe the acrylic face with a soft microfiber cloth and mild glass cleaner every few months to remove dust or overspray – avoid ammonia-based cleaners, which can cloud acrylic over time. The silicone tubing is sealed against moisture, but this sign is rated for indoor use only; exposing it to rain, freezing temperatures, or direct sun through a window will shorten the LED lifespan.
Expect 50,000+ hours of illumination before any noticeable dimming, which translates to roughly 10 years of typical garage use at 12-14 hours per day. When LEDs do eventually fade, the entire sign is replaceable as a unit – individual tube segments are not user-serviceable. Store the sign in its original packaging if you move or redecorate; the acrylic backing can crack if dropped on a hard surface.
Performance garage decor & collectibles
Rated 4.8 by verified buyers
Hooker Headers sign questions
No, this sign is rated for indoor use only. The LED neon tubing and electronics are not weatherproof, so exposure to rain, snow, or freezing temperatures will damage the components and void any warranty. If you need outdoor branding, consider our metal garage signs or vinyl banners designed for exterior mounting.
LED neon produces comparable brightness to traditional glass neon tubes but with better energy efficiency and no flicker. The white Hooker script and red flame graphics are clearly visible in well-lit garages during the day and create a vivid glow in dim or dark spaces. Total output is roughly equivalent to a 40-watt incandescent bulb spread across the sign’s 24-inch width.
The sign arrives with pre-drilled keyhole mounting slots on the back panel, but screws and wall anchors are not included. You’ll need two screws or anchors rated for at least 5 pounds each, spaced 20 inches apart horizontally. Standard drywall anchors or wood screws into studs both work fine for the sign’s 3-pound weight.
No, this model has a simple on/off inline switch with no dimming function. The LED tubing runs at a fixed brightness level optimized for garage and showroom visibility. If you need adjustable lighting, you could add an external plug-in dimmer rated for LED loads, though we haven’t tested third-party dimmers with this specific sign.
The LED strips inside the silicone tubing are rated for 50,000+ hours of continuous operation. At typical garage use of 12-14 hours per day, that translates to roughly 10 years before any noticeable dimming occurs. When the LEDs eventually fade, the entire sign is replaced as a unit – individual tubes are not user-serviceable.
The black acrylic panel is UV-stabilized to resist yellowing under standard indoor lighting. It’s durable enough for everyday garage use but can crack if dropped on concrete or hard tile. Avoid mounting the sign where it could be struck by ladders, long parts, or shop equipment. Clean the face with mild glass cleaner and a microfiber cloth to maintain clarity.
No, this sign ships with a standard North American 110V plug and 6-foot cord. If you’re outside the US or Canada, you’ll need a voltage converter rated for at least 15 watts to step down 220-240V mains power. Plugging the sign directly into higher-voltage outlets will destroy the internal transformer and LEDs immediately.